Industrial Resin Flooring

Reepol have been manufacturers of industrial resin floor systems for more than 30 years. Reepol’s industrial flooring, a specialty of ours, ranges from fast cure resins to polyurethane floor screeds to epoxy resin floor coatings. Any Reepol industrial or commercial floor coating can be enhanced to suit your site’s specific need such as being anti-slip, hygienic, and shock and chemical resistant. Being seamless, resin floors are easy to clean and low maintenance. Our floor coatings meet health & safety standards.

There is more to selecting the best and most appropriate industrial resin flooring. Successful flooring installations call for proper preparation of the substrate. All laitance, oil, grease, water, or any such adhesion-impairing substance must be removed with an appropriate method such as acid etching, grinding, light mechanical scabbling, blasting or degreasing.

If the concrete floor is not new, it must be checked for soundness. It needs to cleaned and loose material must be removed. Damages should be repaired. Reepare Mortar is ideal for this. A porous substrate needs a primer coat or sealer. Our recommended flooring installers know how to repair and prepare any Ice Age: Collision Course movie

Reepol has epoxy resin and polyurethane industrial flooring products and advanced technology that manufactures a wide range of additives to yield industrial flooring with the exact required qualities for any industry. Whether you need resistance to damage from high traffic, chemicals spills, or static, we have the ideal resistant floor solution that will provide the type of performance needed.

Reetop P1200 is one example of a product designed for heavy industrial and commercial environments where resistance to heavy traffic is required such as breweries, factories, gangways, hospitals, dairies, abattoirs. A blend of aggregates, cement, and acrylic resins, Reetop P1200 is pre-weighed to ensure correct batching and consistent mixing on site.

Reegrip EC017 is another example. It’s an industrial non slip floor paint for use where a hard wearing, hygienic, non-slip, and high build epoxy floor coating system is required. Because of the wide variety of additives that our R & D department has created, our floor paint can be made to suit. This non slip floor paint has quartz aggregate, solvent free epoxy resin, and hardeners added. The size of the aggregate adjusts the anti slip factor. Small aggregate provides slip resistance while larger aggregate provides an anti-slip floor coating. For a non slip finish, an even larger aggregate is required.

Other modifications are made for other floor coatings. A different environment might need a flooring installation that needs a resin flooring system to handle wet or oily conditions. It might call for anti static finishes, safety flooring, luminous markings, fire escape routes, demarcation lines and gangway markings for pedestrians and forklift aisles. Perhaps bespoke markings are necessary.

Reepol offer a site survey and no obligation report on the type of poured resin floor that best meets your commercial flooring requirements. Contact a Reepol specialist to inquire about the best flooring systems for your site. From manufacturing to warehousing to the healthcare or food and drink industry, we have your flooring solution.

For more information and a quote, contact Reepol on 01952 588575 or click here.


“Working in the cold forming industry with a high profile customer base, we were looking for a hard wearing floor covering that had to withstand day to day running of a busy manufacturing environment. Using heavy machinery, forklift trucks and a variety of industrial oils and floor cleaning products.”

Arconic Fastening Systems & Rings Ltd.

“Excellent & friendly service, quality product – would recommend to any new customer.”

Link 51
View More