Resin Floor Repair

With Reepol products, repairing a floor has never been easier. There is one positive aspect to floor repairs and that is you can see where the floor took the brunt of the typical activity in the way it was damaged or worn out. Whether it was water damage or high traffic wear and tear or the effects of industrial use such as chemical damage, the road map to repair is possible to follow.

Reepol’s free site survey will provide expert information on the coatings & screeds that your system might require. However, all floor finishes are only as good at the substrate to which they are applied.

Once the repairs are made the type of epoxy coatings that best suit your purpose can be determined and selected. Among the choices are anti slip floor coatings, waterproofing paints & coatings, and floor paint that is static resistant, decorative, durable, hygienic, and with resistance to chemicals.

Reepol’s coatings & screeds and concrete repair products can repair any concrete floor to receive the application of high performance epoxy resin floor paint. We have an ancillary range of DIY concrete repair, polymer and jointing products.

Reepare PR400 S.P. is a self priming epoxy patch repair kit suitable for repairing worn and damaged concrete. It is excellent for spalled concrete surfaces such as steps, damaged factory floors. It’s good for food preparation environments. It is a high strength, low odour quick curing repair material. It’s a blend of epoxy resins, curing agent and selected aggregates. The finished material provides a nonskid and abrasive resistant surface, with good resistance to dilute acids, petrol, oil and grease.

Reebond SBR is a modified styrene butadiene emulsion. It’s polymeric action gives superior adhesion, considerably improved flexural and tensile strength coupled with good compressive strength, abrasion, and water resistance, greatly reduced water permeability and improved chemical resistance. Reebond SBR mortars are nontoxic and non-corrosive and have excellent freeze-thaw resistance and resistance to long term water immersion. Ideal for use in high strength floor screeds, patching and filling, and for producing floor screeds with enhanced freedom from “dusting”, but with improved flexibility and resistance to cracking

Reejoint PU7000 H.E. is a pourable grade two pack polyurethane joint sealant used as elastomech joint filler in all types of industrial flooring including concrete, granolithic, tiling, and polymeric screeds.

Reetop P1200 is a co-polymer flooring screed. Reetop P1200 is suitable for use where an extremely hard wearing floor topping is required. It is laid at a minimum thickness of 10mm and provides a surface ideal for use in heavy industrial and commercial environments where resistance to heavy traffic is required. It’s ideal for use in breweries, factories, gangways, hospitals, dairies, and abattoirs. Based on a blend of hard wearing aggregates, cement, and acrylic resins, it is primed by Reeprime EWD300.

Once the substrate is repaired and the primers and sealers have been applied, choose an epoxy or polyurethane resin floor coatings from our wide range of products. We can match any colour. Choose a high gloss or matte resin floor finish. Resin floor coatings make cleaning easy.

Contact Reepol and talk with a specialist to determine the best products and techniques to use in repairing your floors.

To enquire about the best flooring solution for your needs, contact Reepol on 01952 588575 or click here.

Testimonials

“Working in the cold forming industry with a high profile customer base, we were looking for a hard wearing floor covering that had to withstand day to day running of a busy manufacturing environment. Using heavy machinery, forklift trucks and a variety of industrial oils and floor cleaning products.”

Arconic Fastening Systems & Rings Ltd.

“Excellent & friendly service, quality product – would recommend to any new customer.”

Link 51
View More