Reepol’s floor paint has been installed in many different industrial settings ranging from aviation and automotive to electronics and electrical engineering to food and beverage and pharmaceutical. There is not a factory floor coating that we cannot provide. You can of course do it yourself from our materials supplied, or our nationwide network of expert installers are never daunted by a flooring preparation and finish challenge. From hole repair to preparing a conductive primer surface, they have done it all.
As for the solutions available for use on factory floors, we have a wide range of flooring solutions, which can be customised to meet your needs. We are familiar with the rules and regulations that govern every industry in the UK so we know what standards apply to your commercial and industrial needs.
What other requirements do you have? Do you need an anti slip surface with chemical resistant paints? Is it an industrial area that handles heavy traffic? Do you need a hardwearing line marking paint? Our free site survey helps us help you make the best decisions and choices.
Our product lines always use the latest and greatest technology. Our expert research and development team keeps ahead of the game by anticipating flooring needs.
In certain situations, before the application of any coatings, proper preparation of floors is essential. Sealers and primers may be needed. Perhaps the work should begin with Reebond SBR. This is a modified styrene butadiene emulsion. Its polymeric action mortars provide superior adhesion, considerably improved flexural and tensile strength coupled with good compressive strength, abrasion and water resistance, greatly reduced water permeability and improved chemical resistance.
In addition, Reebond SBR mortars are nontoxic and non-corrosive and they have excellent freeze-thaw resistance and resistance to long-term water immersion.
Reeseal SG100 is a cured insoluble sealer that is un-meltable and highly resistant to a wide range of chemicals as well as having light and weather stability. As with all Reepol’s two pack systems, it comes in pre-weighed units of the correct proportions. Reeseal SG100 is a clear gloss sealer. Reeseal SM100 is the matt sealer version of the same polyurethane technology. These are primarily used to coat screeds that need sealing. These are not paints. These are simply examples of what our products can do to bring your factory floors up to the highest standards. Reepol’s Reecote EC and Reeflor EL products are designed as concrete paint and come in a standard range of colours from pale grey to dark grey as well as black, white, beige, yellow, blue, red, and green.
Reecote EC014 is a solvent-based epoxy coating that is recommended for light industrial factories. Reecote EC014 is a two-pack system and a blend of epoxy resins, curing agents, mineral fillers, and solvent. Reecote EC017 LTC is suitable for factory gangways. It is a solvent-free, hardwearing epoxy coating.
Contact Reepol on 01952 588575 to enquire about the floor paints that would be most suitable for use on your floors. Our experts can provide expertise and advice on the best product for any purpose.
“Working in the cold forming industry with a high profile customer base, we were looking for a hard wearing floor covering that had to withstand day to day running of a busy manufacturing environment. Using heavy machinery, forklift trucks and a variety of industrial oils and floor cleaning products.”
“Excellent & friendly service, quality product – would recommend to any new customer.”